top of page

Open Discussion

Public·17 members
Henry Thomas
Henry Thomas

Bandwidth Splitter for Forefront TMG 2010 - Crack It or Buy It?



Bandwidth Splitter TMG 2010 Crack: A Comprehensive Guide




Bandwidth Splitter TMG 2010 is a program extension for Forefront TMG and ISA Server that allows you to control and limit the bandwidth usage of your Internet connection. It also provides features such as traffic shaping, quotas, monitoring and reporting. In this article, we will explain what Bandwidth Splitter TMG 2010 can do, how to install and configure it, how much it costs, what are its pros and cons, and how it compares with other alternatives. We will also answer some frequently asked questions about Bandwidth Splitter TMG 2010.




bandwidth splitter tmg 2010 crack



What is Bandwidth Splitter TMG 2010?




Bandwidth Splitter TMG 2010 is a program extension for Forefront TMG and ISA Server that supplements it with new features to allow more rational sharing of the existing Internet connection bandwidth and distributing it among all users and servers according to preset rules. The principal features of Bandwidth Splitter TMG 2010 are:


  • Limiting of the Internet connection bandwidth used by individual users and hosts, as well as groups of users and hosts (traffic shaping, throttling)



  • Setting up quotas for the maximum allowable Internet traffic use (in megabytes) for a set period of time (a day, a week or a month) for individual users and hosts, as well as groups of users and hosts



  • Real-time monitoring of all users and their connections through Forefront TMG/ISA Server by the administrator, including the bandwidths used by individual users and connections



  • Generating bandwidth usage reports detailed by user, client IP, shaping or quota rule, and with the graphs showing the dynamics of bandwidth usage



Why do you need Bandwidth Splitter TMG 2010?




If you are using Forefront TMG or ISA Server as your gateway to the Internet, you may have encountered some problems or challenges related to bandwidth management, such as:


  • Your Internet connection is not fast enough to handle all the requests from your users and servers, resulting in slow performance, timeouts, or errors.



  • Some users or applications consume too much bandwidth, leaving little or none for others, causing unfairness and dissatisfaction.



  • You have a limited amount of data that you can use per month, and you want to avoid exceeding it and paying extra fees or getting throttled by your ISP.



  • You want to prioritize some types of traffic over others, such as VoIP, video streaming, or web browsing, to ensure quality of service and user experience.



  • You want to monitor and analyze how your bandwidth is used, by whom, when, and for what purposes, to optimize your network performance and security.



If you face any of these issues, Bandwidth Splitter TMG 2010 can help you solve them. By using Bandwidth Splitter TMG 2010, you can:


  • Control and limit the bandwidth usage of each user and host, as well as groups of users and hosts, according to your rules and policies.



  • Set up quotas for the maximum amount of data that each user and host, as well as groups of users and hosts, can use within a certain period of time.



  • Monitor and report on the bandwidth usage of each user and host, as well as groups of users and hosts, in real-time and with historical data.



By doing so, you can:


  • Improve the performance and reliability of your Internet connection by avoiding congestion and bottlenecks.



  • Ensure fairness and satisfaction among your users by distributing the bandwidth equally or according to your preferences.



  • Save money and avoid penalties by staying within your data plan limits and avoiding unnecessary traffic.



  • Enhance the quality of service and user experience by prioritizing the most important or sensitive traffic types.



  • Optimize your network performance and security by identifying and eliminating bandwidth hogs, abusers, or threats.



How to install Bandwidth Splitter TMG 2010?




To install Bandwidth Splitter TMG 2010 on your Forefront TMG or ISA Server computer, you need to follow these steps:


  • Download the latest version of Bandwidth Splitter TMG 2010 from the official website. The file name is bsplitter_tmg_2010_setup.exe.



  • Run the setup file as an administrator. You will see a welcome screen with some information about Bandwidth Splitter TMG 2010. Click Next to continue.



  • Read and accept the license agreement. Click Next to continue.



  • Select the installation folder. The default location is C:\Program Files\BNTC Software\Bandwidth Splitter\. You can change it if you want. Click Next to continue.



  • Select the components that you want to install. The default selection is Bandwidth Splitter Service (required) and Bandwidth Splitter Management Console (optional). You can uncheck the latter if you don't need it. Click Next to continue.



  • Review the installation settings. Click Install to start the installation process.



  • Wait for the installation to complete. You will see a progress bar showing the status of the installation. When it is done, click Finish to exit the setup wizard.



How to configure Bandwidth Splitter TMG 2010?




To configure Bandwidth Splitter TMG 2010 on your Forefront TMG or ISA Server computer, you need to use the Bandwidth Splitter Management Console. This is a graphical user interface that allows you to create and manage bandwidth shaping rules, quotas, monitoring settings, reports, etc. To access the Bandwidth Splitter Management Console, you need to follow these steps:



  • Open the Forefront TMG Management Console or ISA Server Management Console on your Forefront TMG or ISA Server computer.



  • In the left pane, expand the server node and click on Firewall Policy.



  • In the right pane, click on Toolbox. You will see a list of tools available for Forefront TMG or ISA Server management.



  • In the list of tools, find Bandwidth Splitter Management Console and double-click on it. You will see a new window with the Bandwidth Splitter Management Console interface.



The Bandwidth Splitter Management Console interface consists of four main sections:



  • The menu bar, which contains the main commands and options for Bandwidth Splitter TMG 2010, such as File, Edit, View, Tools, Help, etc.



  • The toolbar, which contains the shortcut buttons for the most frequently used commands and options, such as New Rule, Edit Rule, Delete Rule, Enable Rule, Disable Rule, etc.



  • The rules pane, which displays the list of bandwidth shaping rules that you have created and configured for your Forefront TMG or ISA Server network. You can sort, filter, group, and search the rules by various criteria, such as name, type, status, priority, etc.



  • The properties pane, which shows the details and settings of the selected rule in the rules pane. You can edit the properties of the rule by changing the values of the fields and options in this pane.



To create a new bandwidth shaping rule, you need to follow these steps:



  • In the Bandwidth Splitter Management Console window, click on New Rule in the menu bar or toolbar. You will see a wizard that will guide you through the process of creating a new rule.



  • In the first step of the wizard, enter a name and a description for your rule. The name should be descriptive and unique. The description is optional but recommended. Click Next to continue.



  • In the second step of the wizard, select the type of your rule. There are four types of rules available: Shaping Rule, Quota Rule, Monitoring Rule, and Report Rule. Each type has a different purpose and function. For this example, we will select Shaping Rule. Click Next to continue.



  • In the third step of the wizard, select the scope of your rule. The scope defines which users and hosts will be affected by your rule. You can choose from three options: All Users and Hosts (the rule will apply to everyone who uses your Forefront TMG or ISA Server network), Specified Users and Hosts (the rule will apply only to those users and hosts that you specify in the next step), or Specified Groups of Users and Hosts (the rule will apply only to those groups of users and hosts that you specify in the next step). For this example, we will choose Specified Users and Hosts. Click Next to continue.



  • In the fourth step of the wizard, specify the users and hosts that will be affected by your rule. You can add or remove users and hosts by using the buttons on the right side of the window. You can also use wildcards (*) to match multiple users or hosts with similar names or addresses. For this example, we will add two users (Alice and Bob) and two hosts (192.168.1.100 and 192.168.1.101) to our rule. Click Next to continue.



  • In the fifth step of the wizard, specify the bandwidth limit for your rule. The bandwidth limit defines how much bandwidth each user or host can use at any given time. You can enter a value in kilobits per second (Kbps) or megabits per second (Mbps). You can also use percentages (%) to set relative limits based on the total available bandwidth of your Internet connection or network interface. For this example, we will set a limit of 10 Mbps for each user or host in our rule. Click Next to continue.



  • In the sixth step of the wizard, specify the priority for your rule. The priority defines how your rule will compete with other rules when there is not enough bandwidth for all of them. The higher the priority, the more likely your rule will get its desired bandwidth limit. The lower the priority, the more likely your rule will get less than its desired bandwidth limit or even no bandwidth at all. You can choose from five levels of priority: Highest, High, Normal, Low, and Lowest. For this example, we will set a priority of Normal for our rule. Click Next to continue.



  • In the seventh step of the wizard, review your rule settings and make any changes if necessary. Click Finish to create your rule.



Your new bandwidth shaping rule will appear in the rules pane with a green check mark indicating that it is enabled. You can edit or delete your rule by selecting it and clicking on Edit Rule or Delete Rule in the menu bar or toolbar. You can also enable or disable your rule by selecting it and clicking on Enable Rule or Disable Rule in the menu bar or toolbar.


How much does Bandwidth Splitter TMG 2010 cost?




Bandwidth Splitter TMG 2010 is not a free program extension for Forefront TMG or ISA Server. It requires a license fee for each client computer that connects to your Forefront TMG or ISA Server network through Bandwidth Split Bandwidth Splitter TMG 2010 is not a free program extension for Forefront TMG or ISA Server. It requires a license fee for each client computer that connects to your Forefront TMG or ISA Server network through Bandwidth Splitter. The license fee depends on the number of clients that you want to control with Bandwidth Splitter TMG 2010. The more clients you have, the lower the price per client. Here is a table that shows the pricing and licensing options for Bandwidth Splitter TMG 2010:



Number of Clients


Price (USD)


25


$149


50


$249


100


$349


250


$449


500


$549


1000


$649


Unlimited


$749


The license fee is paid just once, and there are no yearly costs. Licenses are issued to specific computers where Bandwidth Splitter TMG 2010 will be installed and used. To purchase a license, you need to provide the hardware identifier (Hardware Id) of your Forefront TMG or ISA Server computer, which you can find by running the installation program of Bandwidth Splitter TMG 2010. After purchase, you will receive a license key and detailed instructions by email within 24 hours at most. You can make payment via credit/debit cards, bank/wire transfer, PayPal, check, or purchase order. You also get free unlimited email support and free updates for Bandwidth Splitter TMG 2010.


If you already have a license for Bandwidth Splitter for ISA Server 200x, you can upgrade it to use with Bandwidth Splitter TMG 2010 for half price (keeping the same number of licensed clients). Note that you will not be able to use your license with Bandwidth Splitter for ISA Server 200x any more. You can also purchase a license upgrade if you want to increase the number of clients that you can control with Bandwidth Splitter TMG 2010. The license upgrade costs $100.


What are the pros and cons of Bandwidth Splitter TMG 2010?




Bandwidth Splitter TMG 2010 is a powerful and useful program extension for Forefront TMG and ISA Server that can help you manage your bandwidth more efficiently and effectively. However, like any other software, it also has some advantages and disadvantages that you should consider before using it. Here are some of the pros and cons of Bandwidth Splitter TMG 2010:


Pros:





  • It allows you to control and limit the bandwidth usage of each user and host, as well as groups of users and hosts, according to your rules and policies.



  • It allows you to set up quotas for the maximum amount of data that each user and host, as well as groups of users and hosts, can use within a certain period of time.



  • It allows you to monitor and report on the bandwidth usage of each user and host, as well as groups of users and hosts, in real-time and with historical data.



  • It improves the performance and reliability of your Internet connection by avoiding congestion and bottlenecks.



  • It ensures fairness and satisfaction among your users by distributing the bandwidth equally or according to your preferences.



  • It saves money and avoids penalties by staying within your data plan limits and avoiding unnecessary traffic.



  • It enhances the quality of service and user experience by prioritizing the most important or sensitive traffic types.



  • It optimizes your network performance and security by identifying and eliminating bandwidth hogs, abusers, or threats.



  • It is easy to install and configure with a graphical user interface and a wizard.



  • It is compatible with Forefront TMG 2010 and ISA Server 2006/2004/2000.



  • It offers free unlimited email support and free updates.

Cons:





  • It is not a free program extension for Forefront TMG or ISA Server. It requires a license fee for each client computer that connects to your network through Bandwidth Splitter.



  • It may not work well with some applications or protocols that use dynamic ports or encryption, such as VPN, FTP, HTTPS, etc. You may need to adjust your firewall rules or settings to allow them to work properly.



  • It may not be compatible with some other program extensions or add-ons for Forefront TMG or ISA Server that also modify the traffic or bandwidth management, such as GFI WebMonitor, SurfControl Web Filter, etc. You may need to disable or uninstall them to avoid conflicts or errors.



  • It may not be able to control the bandwidth usage of some users or hosts that bypass your Forefront TMG or ISA Server network, such as using proxy servers, VPN services, Tor network, etc. You may need to block or monitor them using other methods or tools.



How does Bandwidth Splitter TMG 2010 compare with other alternatives?




Bandwidth Splitter TMG 2010 is not the only tool or method for managing bandwidth in Forefront TMG or ISA Server. There are some other alternatives that you can consider, such as:



  • Built-in features of Forefront TMG or ISA Server: Forefront TMG and ISA Server have some basic features for bandwidth management, such as bandwidth priorities, bandwidth reservation, and bandwidth control. These features allow you to assign different priorities and limits to different types of traffic, such as HTTP, HTTPS, FTP, SMTP, etc. However, these features are not very flexible and granular, as they do not allow you to control the bandwidth usage of individual users and hosts, set up quotas, monitor and report on bandwidth usage, etc. Therefore, they may not be sufficient for your needs and expectations.



  • Third-party software for bandwidth management: There are some third-party software that can help you manage bandwidth in Forefront TMG or ISA Server, such as SoftPerfect Bandwidth Manager, NetLimiter, Bandwidth Controller, etc. These software can provide more features and options than Bandwidth Splitter TMG 2010, such as scheduling, filtering, shaping, limiting, monitoring, reporting, etc. However, these software may also have some drawbacks, such as higher costs, compatibility issues, installation difficulties, configuration complexities, performance impacts, security risks, etc. Therefore, they may not be suitable for your environment and requirements.



  • Hardware devices for bandwidth management: There are some hardware devices that can help you manage bandwidth in Forefront TMG or ISA Server, such as routers, switches, firewalls, load balancers , etc. These devices can offer more features and options than Bandwidth Splitter TMG 2010, such as routing, switching, firewalling, load balancing, shaping, limiting, monitoring, reporting, etc. However, these devices may also have some drawbacks, such as higher costs, compatibility issues, installation difficulties, configuration complexities, performance impacts, security risks, etc. Therefore, they may not be suitable for your environment and requirements.



As you can see, each alternative has its own strengths and weaknesses. You need to evaluate them carefully and compare them with Bandwidth Splitter TMG 2010 to find the best solution for your bandwidth management needs. Here is a table that summarizes some of the main differences and similarities between Bandwidth Splitter TMG 2010 and other alternatives:



Feature


Bandwidth Splitter TMG 2010


Built-in features of Forefront TMG or ISA Server


Third-party software for bandwidth management


Hardware devices for bandwidth management


Bandwidth shaping


Yes


Yes


Yes


Yes


Bandwidth quotas


Yes


No


Yes


Yes


Bandwidth monitoring


Yes


No


Yes


Yes


Bandwidth reporting


Yes


No


Yes


Yes


User and host control


Yes


No


Yes


Yes


Traffic prioritization


No


Yes


Yes


Yes


Cost


$149-$749


Free


$50-$500


$100-$1000


Compatibility


Forefront TMG 2010 and ISA Server 2006/2004/2000


Forefront TMG 2010 and ISA Server 2006/2004/2000


Forefront TMG 2010 and ISA Server 2006/2004/2000 (may vary)


Any network device (may vary)


Installation


Easy


Easy


Medium


Hard


Configuration


Easy


Medium


Medium


Hard


Performance


High


High


Medium


High


Security


High


High


Low


High


Conclusion




In conclusion, Bandwidth Splitter TMG 2010 is a program extension for Forefront TMG and ISA Server that allows you to control and limit


About

Welcome to the group! You can connect with other members, ge...

Members

Group Page: Groups_SingleGroup
bottom of page